Photonics Map

Picophotonics Oy

Single-frequency Q-switched microchip lasers, 50 ps to 8 ns, at 532, 767, 1064 and 1535 nm

Picosecond LasersTampere, Finland· 4 staff
Visit website ↗

Overview

Picophotonics makes diode-pumped microchip lasers that are passively Q-switched with its own semiconductor saturable absorber mirrors (SESAMs). The result sits between mode-locked and conventional Q-switched lasers: pulses from 50 ps, a single-frequency spectrum, and repetition rates from single shot to 200 kHz without an external pulse picker. Amplified (MOPA) versions reach 10 µJ and over 100 kW peak power at 1064 nm. The range covers 532, 767, 1064 and 1535 nm, including a dual-wavelength 532/1064 nm laser, with free-space or fiber-coupled output and OEM packages down to 45 × 37 × 25 mm.

The company is a spin-off of the Optoelectronics Research Centre at Tampere University. Development, key components and assembly are in Finland, with an in-house cleanroom for semiconductor processing. The company quotes operating lifetimes above 10,000 hours.

Applications & markets

Time-gated Raman spectroscopyLIDAR and ranging, including bathymetric and satellite laser rangingPhotoacoustic microscopy and imagingPump-probe and time-resolved measurementsSupercontinuum generation and nonlinear opticsPump sources for photon-pair generationPhotodetector and timing-electronics characterizationMicromachining and marking

Services

  • Pulse duration, wavelength, pulse energy and repetition rate configured to order
  • OEM integration support from the engineers who designed the laser
  • Free-space or fiber-coupled output

Products & specifications

Figures as published by Picophotonics Oy. Confirm against the current datasheet before specifying or ordering.

SP05 532 nm microchip laser

Product page ↗

Compact frequency-doubled microchip laser with integrated electronics, for low-power time-gated Raman, detector characterization and time-of-flight sensing. Fiber-coupled output optional.

  • 532 nm
  • 50–200 ps
  • up to 200 kHz
  • up to 0.2 µJ
SP05 532 nm microchip laser specifications, as published by Picophotonics Oy
Optical
Wavelength532.2 nm ± 0.3 nm
Spectral width< 0.06 nm
Pulse duration (factory fixed, ± 20 ps)50–200 ps
Repetition ratesingle pulse to 200 kHz (range depends on other parameters)
Maximum pulse energyup to 0.2 µJ (depends on repetition rate)
M² (ISO 11146)≤ 1.3
PolarizationLinear (1:100)
Stability
Average power stability, 1 h (std. dev.)< 1%
Average power stability, 12 h (std. dev.)< 2%
Pulse intensity variation± 2%
Timing jitter, typical≤ 500 ns (depends on repetition rate)
Interfaces
Optical outputFree-space or fiber-coupled
Trigger-outElectrical, SMA, ~300 ps rise time
Trigger-inTTL, up to 100 kHz
Trigger-in delay to output pulse< 8 µs
ControlUSB-C
Power supply12 VDC, 4 A
Mechanical
Dimensions135 × 60 × 64 mm
CoolingAir
Warm-up time< 5 min
Warranty1 year

CP32 532 nm picosecond MOPA laser

Product page ↗

Amplified (MOPA) single-frequency green laser for time-gated Raman spectroscopy, photoacoustics and high-precision LIDAR.

  • 532 nm
  • 50–200 ps
  • up to 5 µJ
  • > 75 kW peak
CP32 532 nm picosecond MOPA laser specifications, as published by Picophotonics Oy
Optical
Wavelength532.2 nm ± 0.2 nm
Spectral width< 0.06 nm
Pulse duration (factory set, ± 20 ps)50–200 ps, extendable to 1 ns
Repetition ratesingle pulse to 200 kHz (range depends on other parameters)
Maximum pulse energyup to 5 µJ (depends on repetition rate)
Maximum average powerup to 200 mW
Peak power> 75 kW
M² (ISO 11146)≤ 1.3
PolarizationLinear (1:100)
Stability
Average power stability, 1 h (std. dev.)< 1%
Average power stability, 12 h (std. dev.)< 2%
Pulse intensity variation± 2%
Timing jitter, typical≤ 500 ns (depends on repetition rate)
Interfaces
Optical outputFree-space or fiber-coupled
Trigger-outOptical, free-space or fiber
Trigger-inTTL, up to 100 kHz
Trigger-in delay to output pulse< 8 µs
Power supply12 VDC, 10 A
Mechanical
Dimensions140 × 95 × 75 mm
CoolingAir or conduction
Warm-up time< 5 min
Warranty1 year

CP2L dual-wavelength picosecond laser

Product page ↗

Amplified microchip laser with synchronized 532 nm and 1064 nm output, aimed at pump-probe measurements, two-color Raman and photoacoustic sO₂ imaging. No datasheet table is published; figures are from the product page.

  • 532 + 1064 nm
  • 50–200 ps
  • 1–100 kHz
CP2L dual-wavelength picosecond laser specifications, as published by Picophotonics Oy
Optical
Wavelength532.2 nm and 1064.4 nm, simultaneous
Spectral width< 0.06 nm at both wavelengths
Pulse duration50, 100 or 200 ps standard; custom up to 1 ns
Pulse duration difference between wavelengths~10%
Repetition rate1–100 kHz
Pulse energy, 532 nmup to 3 µJ
Peak power, 532 nm> 40 kW
Pulse energy, 1064 nmup to 5 µJ
Peak power, 1064 nm> 50 kW
M²< 1.3
Interfaces
Optical outputFree-space or fiber-coupled
Trigger-outOptical, low jitter
Trigger-inTTL, optional

VG10 1064 nm ultracompact OEM laser

Product page ↗

Matchbox-sized picosecond module with an integrated trigger photodiode, for OEM ranging modules and gated detection where space and power are tight. Power supply not included.

  • 1064 nm
  • 60–250 ps
  • up to 0.3 µJ
  • 45 × 37 × 25 mm
VG10 1064 nm ultracompact OEM laser specifications, as published by Picophotonics Oy
Optical
Wavelength1064.4 nm ± 0.5 nm
Spectral width< 0.08 nm
Pulse duration (factory fixed, ± 20 ps)60–250 ps
Repetition ratesingle pulse to 200 kHz (range depends on other parameters); up to MHz on request
Maximum pulse energyup to 0.3 µJ (depends on repetition rate)
M² (ISO 11146)≤ 1.3
PolarizationLinear (1:100)
Stability
Pulse intensity variation± 2%
Timing jitter, typical≤ 500 ns (depends on repetition rate)
Interfaces
Optical outputFree-space; fiber-coupled on request
Trigger-outElectrical, integrated photodiode, ~300 ps rise time
Laser drivetyp. 0.8 A, 1.8 V; max. 1.1 A, 2.5 V
TEC maximum2 A, 2 V
ConnectorMolex PicoBlade 530471260
Mechanical
Dimensions45 × 37 × 25 mm
CoolingTEC and conduction
Warm-up time< 1 min
Warranty1 year

SP10 1064 nm OEM picosecond laser

Product page ↗

Application-ready 1064 nm microchip laser with integrated electronics and USB control, sharing the SP05 package.

  • 1064 nm
  • 60–250 ps
  • up to 200 kHz
  • up to 0.3 µJ
SP10 1064 nm OEM picosecond laser specifications, as published by Picophotonics Oy
Optical
Wavelength1064.4 nm ± 0.5 nm
Spectral width< 0.08 nm
Pulse duration (factory fixed, ± 20 ps)60–250 ps
Repetition ratesingle pulse to 200 kHz (range depends on other parameters)
Maximum pulse energyup to 0.3 µJ (depends on repetition rate)
M² (ISO 11146)≤ 1.3
PolarizationLinear (1:100)
Stability
Average power stability, 1 h (std. dev.)< 1%
Average power stability, 12 h (std. dev.)< 2%
Pulse intensity variation± 2%
Timing jitter, typical≤ 500 ns (depends on repetition rate)
Interfaces
Optical outputFree-space
Trigger-outElectrical, SMA, ~300 ps rise time
Trigger-inTTL, up to 100 kHz
Trigger-in delay to output pulse< 8 µs
ControlUSB-C
Power supply12 VDC, 4 A
Mechanical
Dimensions135 × 60 × 64 mm
CoolingAir
Warm-up time< 5 min
Warranty1 year

CP64 1064 nm picosecond MOPA laser

Product page ↗

The highest-energy CP laser, for supercontinuum pumping, high-precision and satellite laser ranging, and micromachining.

  • 1064 nm
  • 60–250 ps
  • up to 10 µJ
  • > 100 kW peak
CP64 1064 nm picosecond MOPA laser specifications, as published by Picophotonics Oy
Optical
Wavelength1064.4 nm ± 0.3 nm
Spectral width< 0.10 nm
Pulse duration (factory set, ± 20 ps)60–250 ps, extendable to 1 ns
Repetition ratesingle pulse to 200 kHz (range depends on other parameters)
Maximum pulse energyup to 10 µJ (depends on repetition rate)
Maximum average powerup to 500 mW
Peak power> 100 kW
M² (ISO 11146)≤ 1.3
PolarizationLinear (1:100)
Stability
Average power stability, 1 h (std. dev.)< 1%
Average power stability, 12 h (std. dev.)< 2%
Pulse intensity variation± 2%
Timing jitter, typical≤ 500 ns (depends on repetition rate)
Interfaces
Optical outputFree-space
Trigger-outOptical, free-space or fiber
Trigger-inTTL, up to 100 kHz
Trigger-in delay to output pulse< 8 µs
Power supply12 VDC, 10 A
Mechanical
Dimensions140 × 95 × 75 mm
CoolingAir or conduction
Warm-up time< 5 min
Warranty1 year

VS15 1535 nm eye-safe microchip laser

Product page ↗

Er-based nanosecond microchip laser for eye-safe ranging and LIDAR, conduction-cooled on the host heatsink. Power supply not included.

  • 1534 nm
  • 1–8 ns
  • up to 50 kHz
  • up to 12 µJ
VS15 1535 nm eye-safe microchip laser specifications, as published by Picophotonics Oy
Optical
Wavelength1534.4 nm ± 1 nm
Spectral width< 0.5 nm
Pulse duration (factory fixed, ± 1 ns)1–8 ns
Repetition ratesingle pulse to 50 kHz
Maximum pulse energyup to 12 µJ at 1 kHz (depends on repetition rate)
Pulse intensity variation± 2%
Interfaces
Optical outputFree-space
Trigger-outElectrical, integrated photodiode
Laser drivetyp. 2.5 A, 2 V; max. 4 A, 4 V
ConnectorHarting Flexicon 2.54 mm
Mechanical
Dimensions25 × 45 × 7 mm
CoolingConduction, mounted on a heatsink
Warranty1 year

SP07 767 nm nanosecond microchip laser

Product page ↗

High-energy 767 nm nanosecond source for photoacoustic imaging, detector characterization and long-range sensing; a fixed-wavelength alternative to an OPO.

  • 767 nm
  • 3–6 ns
  • 1 kHz
  • > 10 µJ
SP07 767 nm nanosecond microchip laser specifications, as published by Picophotonics Oy
Optical
Wavelength767.2 nm ± 1 nm
Spectral width< 1.0 nm
Pulse duration (factory fixed)3–6 ns
Repetition rateup to 1 kHz
Maximum pulse energy> 10 µJ
M²< 1.3
PolarizationLinear (1:100)
Stability
Power stability, 1 h (std. dev.)< 2%
Power stability, 12 h (std. dev.)< 5%
Pulse-to-pulse intensity variation< ± 5%
Interfaces
Optical outputFree-space or fiber-coupled
Trigger-outOptical or electrical, on request
Power supply12 VDC, 10 A
Mechanical
Dimensions140 × 95 × 70 mm
Optical height54 mm
CoolingAir or conduction
Warm-up time< 5 min
Warranty1 year or 2,000 h of operation

Similar Picosecond Lasers companies

AMPHOS GmbH

We are a leading manufacturer of powerful ultrashort pulse lasers utilizing cutting-edge InnoSlab Technology. Our state-of-the-art lasers are commercially available with an impressive output power exceeding 600 W a pulse duration of 1 ps and pulse energy reaching up to 20 mJ.

Picosecond LasersHerzogenrath, Germany · 50 staff

Applied Energetics Inc.

Applied Energetics is a Tucson, Arizona company that designs and develops fiber-based ultrashort pulse (USP) laser systems for directed-energy defense. Instead of heating a target the way high-power continuous-wave lasers do, its systems couple ultrashort pulses, with nonlinear wavelength generation, into the optical sensors of cameras, drones and ISR platforms, disabling the sensor at low average power. The company says the fiber architecture cuts size, weight and power by orders of magnitude compared with continuous-wave laser weapons, so many effectors can be mounted on vehicles, vessels and towers. Its lead product is PLAID (Pulsed Laser Air Defense), an effector designed to integrate with radar, EO/IR sensors and C2 networks in a layered air defense. Applied Energetics describes its USP technology as tunable from the deep ultraviolet to the far infrared and from continuous wave to sub-picosecond pulses. It builds on about 25 years of R&D and a patent portfolio that includes Laser Guided Energy (LGE) and Laser Induced Plasma Channel (LIPC) technologies, plus applications held under government secrecy orders. The company is publicly traded and names defense, intelligence, space, biomedical and advanced manufacturing as its target markets.

Picosecond LasersTucson, AZ, United States · 35 staff

Passat Ltd.

Passat Ltd. develops and manufactures compact diode-pumped solid-state lasers for scientific, industrial and OEM applications—from infrared through visible, ultraviolet and deep-ultraviolet wavelengths.

Picosecond LasersConcord, Canada · 19 staff

Ampliconyx Oy

Ampliconyx was founded in 2016 as spin-off from Optoelectronics Research Centre of Tampere University of Technology – the home of Finland’s photonics industry.

Picosecond LasersTampere, Finland · 13 staff

QS Lasers

Founded in 2018, QS Lasers is a trusted manufacturer of compact, precision engineered DPSS lasers – including passively, actively Q-switched, and gain-switched picosecond models. Built for seamless OEM integration and high volume production, our lasers deliver reliable, high-performance solutions for the most demanding industrial, scientific, and research applications.

Picosecond LasersVilnius, Lithuania · 11 staff

GEOLA Digital Ltd.

Design and manufacture of pulsed SLM lasers, including high energy, sub-ns and RGB pulsed lasers; laser optomechanical components; master originators for security holography; digital holograms, holographic studios, digital holographic printers and copiers. Sales of all holographic materials.

Picosecond LasersVilnius, Lithuania · 3 staff
Picophotonics Oy: Picosecond Lasers · Photonics Map