Anti-reflection and optical coating guide: AR, HR and how to choose a coater
A practical buyer's guide for engineers and purchasers: what AR, HR and dichroic films do, which specs belong on a coating print, how to read LIDT with test conditions, and how to shortlist a coating house for your substrates. Supplier listings stay on the category hub.
Supplier directory · By Photonics Map · reviewed 2026-10
- Common jobs
- AR, HR, dichroic, beamsplitter, filter
- How they work
- Thin-film interference
- Typical materials
- Oxides, fluorides, metals (some HR)
- Process families
- Evaporation, IAD, IBS and others
- Laser buyers ask
- LIDT with stated test conditions
- Business model
- Often coat-to-print on your optics
Who this guide is for
Optical engineers, laser system builders and purchasing leads who send lenses, mirrors, windows or filter blanks out for coating, or who buy coated stock optics and need to write a coherent RFQ. If you only need a company list, use the optical coatings supplier hub linked at the end.
What optical coatings are
Optical coatings are thin films, usually of transparent dielectric materials, deposited on lenses, mirrors, windows and filters so the surface reflects or transmits the intended wavelengths. Interference among reflections from the layer interfaces sets reflectance and transmittance. The same stack also strongly influences how much laser fluence the surface can survive. Many buyers treat coating as a service: substrates go out bare and come back coated to a specification.
Decision table: which coating job you are buying
| Regime | Pulse | Strength | Choose when |
|---|---|---|---|
| Anti-reflection (AR) | Lower Fresnel loss | Reduces surface reflectance so more light transmits through lenses and windows and fewer ghost images appear. Single-layer designs often target one wavelength; multilayer V-coats and broadband stacks trade residual reflectance against bandwidth and angle range (RP Photonics). | You are coating imaging optics, laser windows, multi-element lenses or protective viewports where transmission and ghost control matter more than high reflectance. |
| High reflector (HR) / laser mirror | High R at design λ | Dielectric multilayers (often dozens of layers) reach very high reflectance at design wavelengths with low absorption compared with many metallic mirrors, which is why laser cavity and beam-delivery mirrors are usually dielectric (RP Photonics). | You need a laser mirror, output coupler (partial HR) or high-R fold mirror at a stated wavelength, angle and polarization. Put LIDT conditions next to the R target on the print. |
| Dichroic / harmonic separator | Different R/T by λ | A dichroic mirror has significantly different reflection or transmission in two wavelength regions. Short-pass and long-pass designs separate or combine bands; performance depends on angle of incidence (RP Photonics). | You separate pump from harmonic, combine colors on one path, or need a hot/cold-style heat reflector. Specify both wavelength bands, AOI and which band reflects. |
| Interference filter | Band shape / blocking | Dielectric interference filters implement band-pass, notch and edge shapes. Edge steepness and out-of-band blocking often matter more than laser LIDT for fluorescence and sensing (RP Photonics). | Your RFQ is driven by passband width, edge location, OD blocking or notch depth rather than cavity-mirror reflectance. Do not reuse a laser-HR datasheet template. |
Specs that actually change the quote
| Specification | Typical | Why it matters |
|---|---|---|
| Coating type | AR, HR, dichroic, polarizer, filter | Sets the job. AR lowers loss on lenses and windows; HR makes laser mirrors; dichroics and filters separate or pass bands. Ask for the wrong type and no LIDT number will save the purchase. |
| Wavelength and AOI | Design λ and angle (e.g. 0° or 45°) | Interference coatings are angle- and wavelength-sensitive. Quote the band, angle of incidence and polarization (s, p or unpolarized) you will actually use. |
| R or T targets | e.g. R > 99.5 % or R < 0.25 % per surface | The numbers that appear on the coating run sheet. Tighter specs cost more and need better process control; looser ones may be fine for alignment lasers and cost less. Distinguishing average vs maximum residual reflectance matters for AR (RP Photonics). |
| Laser-induced damage (LIDT) | Quoted with λ, pulse width, PRF, spot, test standard | Decide whether the optic survives your beam. Only compare LIDT figures that share test conditions; pulse duration and wavelength change the damage regime. Standardized testing (e.g. ISO 21254 framing in RP Photonics) exists so numbers can be compared when conditions match. |
| Deposition process | E-beam evaporation, IAD, IBS, others | Changes packing density, scatter, spectral shift with humidity and often damage behavior. Dense processes (IAD, IBS) generally cost more; evaporated coatings remain common for less demanding jobs. |
| Substrate and environment | Glass, fused silica, crystal; humidity, vacuum, cleaning | Adhesion, stress and spectral shift depend on the substrate and where the part lives. Say whether parts will be cleaned ultrasonically, used in vacuum, or see wide temperature swings. |
Architectures
- 01
Electron-beam evaporation
A common workhorse for many AR and moderate-performance stacks. Conventional evaporated films can show a columnar, porous microstructure that adsorbs water vapor, which shifts the effective refractive index and therefore the spectral curve between air and vacuum (RP Photonics on AR coatings). Fine for many imaging and low-fluence jobs when the house controls the process.
- 02
Ion-assisted deposition (IAD)
Energetic assistance during growth densifies the film relative to simple evaporation. RP Photonics notes that IAD and similar energetic methods produce denser, less porous layers with better humidity stability and generally higher mechanical hardness than conventional e-beam films. Ask the house when they propose IAD versus plain evaporation for your environment.
- 03
Ion beam sputtering (IBS) and other dense processes
IBS is widely used when buyers need dense films, low scatter and strong environmental stability. RP Photonics associates energetic methods such as IBS with dense non-porous layers and notes IBS among processes known for relatively high damage thresholds. Expect higher cost; do not pay for IBS when a well-made evaporated AR already clears the gate.
- 04
Coat-to-print vs catalog coated stock
Many houses coat parts you already machined: send blanks or finished optics with a coating print, get them back coated and inspected. Catalog coated optics win when a standard curve fits; custom coating wins when wavelength, AOI, substrate or LIDT fall outside stock. State which model you are buying on the RFQ.
Applications snapshot
Lasers and photonics
Laser cavity and beam-delivery mirrors
High-reflector coatings at the laser wavelength (and often harmonics) on fused silica or other laser-grade substrates. LIDT and scatter dominate the conversation; write pulse duration and test method next to any damage figure.
Imaging and laser systems
Anti-reflection on lenses and windows
Single-wavelength V-coats or broadband AR stacks cut Fresnel loss and ghost reflections. Common on multi-element lenses, viewports and protective windows. Specify residual reflectance over the band and AOI range you actually use.
Ultrafast and DPSS lasers
Harmonic separation and dichroics
Coatings that reflect one wavelength and transmit another, used to separate pump and harmonic beams or to combine colors on one path. AOI and which band reflects must be explicit; edges shift with angle.
Life science and sensing
Filters and fluorescence systems
Bandpass, long-pass and notch filters built as dielectric stacks, where edge steepness and blocking OD matter more than laser LIDT. Borrow a fluorescence filter RFQ template, not a cavity-mirror one.
Custom and OEM
Contract coating of customer optics
Send a drawing, clear aperture, polish grade and witness-sample plan. Agree who owns strip-and-recoat if the run misses spectral targets or adhesion fails.
How to choose
- 01
Write a coating print, not a product name
Coaters quote from wavelength, AOI, polarization, R/T targets, clear aperture and LIDT conditions. "Broadband AR" alone is not a specification; the same words mean different curves at different houses.
- 02
Match process to the stress that matters
If the optic sees high fluence, humid air or tight spectral stability, ask which deposition process they propose and why. Do not pay for IBS when a well-made evaporated AR will do.
- 03
Demand LIDT with conditions
Pulse duration, wavelength, repetition rate, spot size and test method belong next to the number. Without them you cannot rank vendors. For CW and ultrafast beams, treat the thresholds as different physical regimes (RP Photonics notes damage behavior depends on pulse duration).
- 04
Plan for the substrate you already have
Crystal orientation, polish quality and edge bevels affect yield. Send a drawing and say whether you can supply witness samples for spectral measurement.
- 05
Ask who owns rework
Coating runs fail. Agree in advance what happens if reflectance misses target or adhesion fails: strip and recoat, replace substrate, or scrap.
How to shortlist suppliers
- 01
Lock the coating job on one page
AR, HR, dichroic or filter; design wavelengths; AOI and polarization; R/T or OD targets; environment. That page is what vendors should respond to.
- 02
Separate laser-optic capability from imaging AR
Low-absorption, defect-controlled laser processes are not interchangeable with commodity spectacle or camera AR. Shortlist houses that show relevant laser or filter work for your class of part.
- 03
Require comparable LIDT or a sample plan
Either demand damage data under matched conditions or arrange a witness/sample exposure under your beam. Datasheet peaks without conditions are not a ranking.
- 04
Compare process, lead time and rework terms
Ask which chamber process they will run, typical spectral yield, strip/recoat policy and whether they coat your substrate material routinely.
- 05
Browse suppliers on the hub
Once the coating print is clear, use the optical coatings supplier directory to see who lists coating capability, then request quotes against your print.
Ready to browse companies? Open the supplier hub.
Frequently asked questions
›What is the difference between a metallic and a dielectric mirror coating?
Metallic coatings (for example aluminum or silver) reflect over a wide band but absorb more and usually handle less laser power. Dielectric multilayer coatings can reach very high reflectance at design wavelengths with low absorption, which is why laser mirrors are almost always dielectric (RP Photonics).
›What does AR coating mean?
Anti-reflection coating. It reduces Fresnel reflection at a surface so more light gets through a lens or window and fewer ghost images appear. The simplest designs target one wavelength; broadband designs cover a range at the cost of a higher residual reflection.
›What is the difference between a V-coating and a broadband AR?
A V-coating is optimized for a narrow band (often a single laser line) and can reach very low residual reflectance there. Broadband AR covers a wider spectral range with a compromise on how low the residual reflectance gets across that range (RP Photonics FAQ framing).
›Why do coating houses ask for angle of incidence?
Layer optical thickness changes with angle, so reflectance and the spectral edge shift. A mirror or filter designed for 0° will not meet the same numbers at 45° unless designed for that angle. Dichroic performance likewise depends on AOI (RP Photonics).
›What is LIDT?
Laser-induced damage threshold: the fluence or intensity at which the coated surface shows damage under a stated test. Always read the test conditions; they matter as much as the number. Pulse duration in particular changes how deterministic damage looks (RP Photonics).
›Can any glass house coat laser optics?
Not interchangeably. Laser optics need low absorption, controlled defects and a damage-tested process. Imaging AR on borosilicate and a high-fluence 1064 nm HR are different capabilities even if both are called optical coatings.
›Why does humidity or vacuum shift my coating curve?
Porous evaporated films can adsorb water vapor, changing the effective refractive index and shifting the spectrum (sometimes called air or vacuum shift). Denser IAD or IBS films are generally more stable with humidity (RP Photonics).
Sources
- RP Photonics Encyclopedia: Dielectric coatings · definition of dielectric / interference thin-film coatings; fabrication families
- RP Photonics Encyclopedia: Anti-reflection coatings · AR principle, V-coat vs broadband, humidity shift vs dense processes
- RP Photonics Encyclopedia: Dielectric mirrors
- RP Photonics Encyclopedia: Dichroic mirrors · dual-band R/T, short-pass / long-pass, AOI dependence
- RP Photonics Encyclopedia: Laser-induced damage · why LIDT numbers need test conditions; pulse-duration regimes
- RP Photonics Encyclopedia: Optical filters
Figures are the commercially common cases, not physics records. Where sources disagree the page gives a range and says so.