Quantum cascade lasers: what to know before buying
A quantum cascade laser (QCL) is the usual electrically pumped source for the mid-infrared. Three resonator types cover different jobs, and the numbers that matter for a purchase are tuning range, power and operating temperature. Not a ranking of suppliers.
Supplier directory · By Photonics Map · reviewed 2026-11
- Typical band
- mid-infrared, 3–50 μm
- Room-temperature CW power
- typically milliwatts
- Operating voltage
- of the order of 10 V
Who this guide is for
Engineers and lab managers who need a mid-infrared source, usually for trace-gas spectroscopy, and want to know which QCL type, wavelength and specifications to ask suppliers about. It does not cover interband cascade lasers or optical parametric oscillators, which are alternatives.
What a QCL is
A quantum cascade laser is a semiconductor laser, usually emitting in the mid-infrared or terahertz range. An ordinary laser diode gets light from electrons and holes recombining across the band gap, so its wavelength is set by the material. A QCL is unipolar: electrons make transitions between engineered energy levels inside the conduction band, and each electron then tunnels into the next period of a stack of quantum wells and emits again. That is the cascade, and it lets one electron produce several photons. Because the levels are set by the layer thicknesses, a QCL can be designed for a wavelength from a few micrometers to well above 10 μm and into the terahertz region (RP Photonics and Wikipedia).
Decision table: Fabry–Pérot, DFB or external-cavity QCL
| QCL type | Best at | Strength | Choose when |
|---|---|---|---|
| Fabry–Pérot (FP) | high power, multimode | Multimode at higher currents. Tuned mainly by temperature. | Illumination or broad absorption features. |
| Distributed feedback (DFB) | single mode, fine tuning | Single mode. A few wavenumbers by temperature and current. | Gas sensing on one absorption line. The standard choice. |
| External cavity (EC) | single mode, broad tuning | Often over 10 % of center wavelength (RP Photonics), over 15 % (Wikipedia). | Complex mixtures, research needing flexibility. |
| Extended-tuning chips | monolithic, modest range | About 0.7 % with heaters, 4 % with Vernier gratings, under 0.1 % for plain DFB. | More range than DFB without an external cavity. |
How to choose
- 01
Pick the wavelength before the type
A QCL is designed for a wavelength, and most commercial ones emit between 3 and 50 μm by the ISO definition of the mid-infrared that RP Photonics cites. Decide which absorption line or band you need first. Then ask which suppliers make a QCL at that wavelength and in which resonator type.
- 02
Match the tuning range to the number of targets
A DFB laser covers one absorption feature by temperature and current tuning. If you must scan several lines or a complex mixture, an external-cavity QCL covers a much broader range. The two sources disagree on how broad: RP Photonics says often more than 10 % of the center wavelength, and Wikipedia gives over 15 % for a grating-tuned device. Ask the supplier for the measured range of the specific product.
- 03
Check power and operating temperature together
RP Photonics says continuously operating room-temperature devices typically reach milliwatt-level power, with watt-level continuous power achieved in specific designs. With liquid-nitrogen cooling, several watts are readily attainable, and at room temperature watt-level peak power is possible with short pulses. Efficiency is usually a few tens of percent, and about 50 % has so far only been demonstrated under cryogenic conditions. A quoted power therefore only makes sense with its temperature and duty cycle.
- 04
Plan for the drive electronics
QCLs need a comparatively high operating voltage, of the order of 10 V, against a few volts for an ordinary laser diode (RP Photonics). Ask what driver, temperature controller and cooling come with the laser, and whether they are included in the price.
How to shortlist suppliers
- 01
Write the spectroscopy sheet
Target wavelength or wavenumber, number of absorption lines to cover, required tuning range and speed, power at the sample, continuous or pulsed operation, and whether thermoelectric cooling is acceptable.
- 02
Ask each supplier the same questions
Resonator type, measured tuning range at the operating point, power and operating temperature quoted together, linewidth, what driver and cooling are included, and the measured lifetime in hours of operation. Neither source we used gives a lifetime figure, so treat a quoted one as the supplier's own.
- 03
Then browse suppliers
Use the quantum cascade laser category to find companies. Listing order is not a ranking of quality or suitability.
Ready to browse companies? Open the supplier hub.
Frequently asked questions
›What wavelengths do quantum cascade lasers emit?
Most emit mid-infrared light, between 3 and 50 μm by the ISO 20473 definition that RP Photonics cites. They can also be engineered for the terahertz region. Wikipedia describes the emission as the mid- to far-infrared.
›Why do QCLs need a higher voltage than laser diodes?
The structure stacks several tens or even about 100 periods in series, so one injected electron can emit in each. That raises gain but needs an operating voltage of the order of 10 V, whereas only a few volts suffice for ordinary laser diodes (RP Photonics).
›How much power does a QCL give?
RP Photonics: milliwatt level for continuous room-temperature devices, though watt-level has been achieved in specific designs, and several watts continuous with liquid-nitrogen cooling. At room temperature, watt-level peak power is possible with short electrical pulses.
›Which QCL type is best for gas sensing?
RP Photonics calls distributed-feedback QCLs the standard for high-precision gas sensing because temperature and current tune the emission across one absorption line. External-cavity types suit complex mixtures where a wide tuning range matters.
›When were the different QCL types first sold?
Wikipedia gives Fabry–Pérot devices as first commercialized in 1998, DFB devices in 2004 and broadly tunable external-cavity devices in 2006.
Sources
- RP Photonics Encyclopedia: Quantum cascade lasers · working principle; device types; output power and efficiency; operating voltage; applications
- Wikipedia: Quantum cascade laser · cross-check: unipolar operation; resonator types; tuning ranges; commercialization dates; applications
Figures are the commercially common cases, not physics records. Where sources disagree the page gives a range and says so.