Photonics Map

Choose femtosecond laser specs: duration, wavelength and power

An RFQ-numbers guide for the three datasheet axes that shape every femtosecond quote: pulse duration at the workpiece, wavelength (including harmonics), and how average power splits into pulse energy and repetition rate. Not a vs-pico decision guide and not a full architecture shortlist.

Supplier directory · By Photonics Map · reviewed 2026-10

Pulse duration
FWHM at the workpiece
Wavelength
Fundamental ± harmonics (SHG)
Power relation
Energy = average power ÷ rate
Buyer trap
Over-buying duration or Watts

Who this guide is for

Process engineers and micromachining buyers who already know they need a femtosecond (or ultrafast) source and need to size the main datasheet specs before quotes. If you are still choosing between picosecond and femtosecond, read that satellite first. For architectures, OEM vs turnkey and supplier shortlisting, use the deep femtosecond guide.

Three specs that drive the RFQ

RP Photonics lists pulse duration, center wavelength, pulse repetition rate, average power and pulse energy among the key performance figures of femtosecond lasers. For a regular pulse train, pulse energy is average power divided by repetition rate. Peak power scales roughly with energy over duration (with a shape-dependent factor), so the same average power can mean very different processes. Wavelength often starts near 1–1.1 μm for powerful sources; frequency doubling (second-harmonic generation) halves the vacuum wavelength (for example infrared to green) at the cost of conversion efficiency. Chromatic dispersion in the beam-delivery path can stretch ultrashort pulses, so the duration that matters is the one at the workpiece, not only on the oscillator datasheet.

Decision table: duration, wavelength, and power

Pulse regimes compared for buyer decisions
RegimePulseStrengthChoose when
Pulse durationShorter fs · longer fs (still ≪ 1 ps)Shorter pulses raise peak power for a given energy and support nonlinear absorption in transparent materials. RP Photonics notes that for material processing, femtosecond is not automatically better than picosecond when the picosecond duration is already below the electron–phonon coupling time. Within the fs band, datasheet duration is FWHM; delivery optics can broaden it via chromatic dispersion.Transparent or multiphoton processes, or failed quality on longer ultrafast samples: push shorter and verify on-sample duration. Proven industrial cuts with acceptable HAZ on a longer fs window: do not pay for sub-100 fs research specs without a sample reason.
WavelengthIR fundamental · green / UV harmonicsAbsorption length and spot size change with wavelength. RP Photonics notes near-infrared is common because powerful sources sit there, while frequency doubling toward ~0.5 μm (green) can improve absorption in materials such as copper despite conversion loss (often substantial). Tripling or quadrupling reaches the ultraviolet, where many materials absorb strongly. Transparent workpieces may rely on multiphoton absorption at high intensity rather than linear absorption.Metals or organics with weak IR coupling: ask for green or UV and budget power after conversion. Glass or sapphire subsurface work: confirm the nonlinear path and beam-delivery scheme. IR-only processes with proven recipes: skip harmonics unless samples demand them.
Average powerThroughput budget · not a process by itselfAverage power is what a slow power meter reads for a pulse train. It sets how much energy per second you can put into the part, and it is tightly tied to system class and price. Alone it does not define fluence or feature quality.Parts-per-hour targets are fixed: size power after you know energy-per-pulse and scan strategy. Lab or sample work: start lower and escalate only when the process window is proven.
Pulse energy × repetition rateHigh E, low rate · low E, high rateSame average power, two processes. Mode-locked oscillators often run tens to hundreds of megahertz at modest energy; amplifiers with pulse pickers drop the rate so each pulse can carry far more energy. Ablation often needs a threshold fluence: too little energy and little is removed; far above threshold efficiency is not automatically better (RP Photonics).Deep drilling or high-fluence features: favour energy and a rate the motion system can use. Surface texturing or fine scanning: favour higher rate at lower energy. Write both numbers on the RFQ, not only Watts.
Peak power and intensityDerived from E, τ, and spot sizePeak power is the maximum optical power of the pulse; for ultrashort pulses it is usually calculated from energy and duration. Optical intensity is power per unit area at the focus. Both drive nonlinear optics and ablation physics; neither is a substitute for stating energy, duration and beam quality on the RFQ.Ask vendors for the assumed pulse shape when they quote peak power, and for spot size / M² when they quote intensity or fluence. Compare systems on shared fluence and on-sample duration metrics.

Specs to put on the RFQ

Key specifications and what each one changes
SpecificationTypicalWhy it matters
Pulse duration at the workpieceAsk for FWHM after your delivery trainRP Photonics defines pulse duration most often as FWHM of optical power versus time. Compressors, harmonics and dispersive optics change what reaches the focus. Require the measurement method (autocorrelator assumptions, FROG, etc.) when duration is a bid differentiator.
Center wavelength and harmonicsFundamental ± green / UV conversion pathState whether IR is enough or you need frequency-converted output. Conversion efficiency, crystal lifetime and alignment sensitivity belong in the commercial discussion once the wavelength is fixed.
Average powerAt the stated wavelength and rateSpecify whether the number is before or after harmonics and at which repetition rate. Harmonic modules reduce usable power; compare apples to apples.
Pulse energy and repetition rateBoth numbers, plus burst if offeredEnergy = average power ÷ rate for a clean pulse train. Burst mode adds a second rate (within-burst vs burst-to-burst). Match the split to feature depth versus scan speed.
Beam quality and stabilityM², power stability over a shiftFeature size and yield ride on focusability and drift. Factory buyers should weight stability and service response alongside peak performance.
Sample metrics on your materialHAZ, taper, chipping, throughputAblation threshold and quality depend on material, surface and pulse parameters. Datasheet averages rarely survive the first fixture: insist on agreed sample metrics.

How to choose

  1. 01

    Choose pulse duration from the process gate

    Start from the quality gate (HAZ, chipping, subsurface damage), not from the shortest brochure number. If you have not yet decided femtosecond versus picosecond, resolve that first on the vs-pico satellite. Inside the femtosecond band, verify duration at the workpiece: chromatic dispersion can broaden pulses in the delivery path. Escalate to shorter pulses only when samples fail for a reason that shorter duration can fix.

  2. 02

    Choose wavelength from absorption and feature size

    Pick the wavelength that couples into your material at the intensity you can deliver. Near-infrared fundamentals are common because high-performance sources sit there; green or UV via frequency conversion can raise linear absorption for some metals and organics, at the cost of converted power. Transparent dielectrics often need the multiphoton path: confirm that with process samples rather than assuming a harmonic module is required.

  3. 03

    Choose power as energy × rate, not Watts alone

    Write the average power only after you know the pulse energy the feature needs and the repetition rate your scanner or stage can use. Two lasers with identical average power can behave completely differently. Over-buying Watts without a fluence and scan plan is a common RFQ mistake.

How to shortlist suppliers

  1. 01

    Lock material and feature geometry first

    Material stack, feature size, maximum acceptable HAZ or chipping, and whether the beam must work inside a transparent workpiece. That sheet decides wavelength and energy before brand.

  2. 02

    Write duration, wavelength, energy, and rate as four lines

    Do not collapse them into a single “X W femtosecond laser” line. Note whether harmonics are required and whether duration is specified at the laser output or at the sample.

  3. 03

    Require on-sample verification

    Ask for pulse duration and quality metrics after the optics train you will actually use, plus cuts or drills on your real material under agreed HAZ and throughput metrics.

  4. 04

    Read the deep guide, then open the supplier hub

    Once the three axes are drafted, use the full femtosecond guide for fiber vs solid state and OEM vs turnkey, then browse suppliers on the category hub.

Ready to browse companies? Open the supplier hub.

Frequently asked questions

›What is the relationship between average power, pulse energy and repetition rate?

For a steady train of identical pulses, pulse energy is average power divided by pulse repetition rate (RP Photonics). Always state all three, or at least energy and rate, on the RFQ so vendors cannot hide behind a Watts number alone.

›Why does pulse duration at the workpiece differ from the datasheet?

Ultrashort pulses are sensitive to chromatic dispersion and nonlinearities in the beam path. Compressors, harmonic crystals and focusing optics can broaden the pulse. Ask for the FWHM duration (and measurement method) after the delivery train you will use.

›When should I specify green or UV instead of infrared?

When linear absorption at the fundamental is too weak for a stable process window, or when feature size needs a shorter wavelength focus. Frequency doubling converts IR to green (half the vacuum wavelength) with conversion loss; further harmonics reach the UV. Confirm with samples: conversion cost is wasted if IR already clears the gate.

›Is higher average power always better?

No. Average power sets energy available per second, but ablation quality depends on fluence, pulse duration and scan strategy. Excess power that cannot be used in the process window mainly raises cost, cooling and optics risk.

›How is peak power related to these specs?

Peak power is the maximum optical power of the pulse. For ultrashort pulses it is usually calculated from pulse energy and duration with a factor that depends on pulse shape (for example ≈ 0.88 × E/τ for sech² pulses). It is a derived figure: still put energy and duration on the RFQ.

›Where do I go after the specs sheet is drafted?

If the regime (fs vs ps) is still open, read the vs-pico satellite. Otherwise use the deep femtosecond guide for architecture and packaging, then the femtosecond supplier hub to shortlist companies against your process sheet.

Sources

Figures are the commercially common cases, not physics records. Where sources disagree the page gives a range and says so.

Choose Femtosecond Laser Specs: Duration, Wavelength, Power · Photonics Map