Photonics Map

Femtosecond lasers: architectures, applications and shortlist

A shortlist guide for engineers and buyers: what femtosecond lasers are, fiber vs solid state and OEM vs turnkey, where they are used, and how to shortlist suppliers. For pico vs fs regime choice, for sizing pulse duration, wavelength and power, or for mapping which application cluster shapes the RFQ, use the linked satellites.

Supplier directory · By Photonics Map · reviewed 2026-10

Pulse duration
10 fs – 900 fs
Common wavelengths
1030 nm (Yb), 800 nm (Ti:sapphire), 1550 nm (Er)
Repetition rate
1 kHz – 100 MHz
Pulse energy
µJ – mJ
Average power
1 W – 240 W
Defining trait
Minimal heat-affected zone

Who this guide is for

Process engineers, lab managers and micromachining buyers who already know they need an ultrashort pulse and need to shortlist a femtosecond system class. If you are still choosing picosecond vs femtosecond, start with that satellite. If the three RFQ numbers are still open, use the choose-specs satellite. If you need to name micromachining vs medical vs research before quotes, use the applications satellite. If you only need a supplier list, use the category hub linked at the end.

What they are

A femtosecond laser emits light in pulses lasting a few quadrillionths of a second (1 fs = 10⁻¹⁵ s), typically between 10 fs and 900 fs. Because each pulse ends before heat can spread into the surrounding material, femtosecond lasers remove material by direct bond-breaking rather than melting: a process usually called cold ablation. That makes them the tool of choice for cutting, drilling and structuring materials where a melted or cracked edge would be unacceptable.

Architectures

  1. 01

    Fiber-based systems

    Fiber oscillators and amplifiers tend to be compact, robust and maintenance-light. They favour the factory floor and OEM integration where uptime and footprint matter more than the absolute highest pulse energy. Many industrial fs sources in the 1–100 W class are fiber or fiber-seeded.

  2. 02

    Bulk solid-state systems

    Crystal-based amplifiers (for example Yb:YAG or Ti:sapphire) generally reach higher pulse energies and, in research systems, the shortest pulses. They are common in labs and in high-energy industrial heads where a fiber alone cannot deliver the energy per pulse.

  3. 03

    Hybrid designs

    A fiber oscillator seeding a solid-state amplifier is a common commercial pattern: the fiber side supplies a clean, stable seed; the bulk amplifier supplies energy. Ask vendors which stage sets your limiting noise, stability and service intervals.

  4. 04

    OEM module vs turnkey system

    An OEM laser head is the light source for integrators who already own scanners, motion and process know-how. A turnkey micromachining system includes beam delivery, motion, fixturing and often a process recipe. For a first production line, buying the process (system or job shop) usually beats buying only the box; bring the head in-house once the recipe is proven.

Applications snapshot

Medical

Medical device manufacturing

Cutting coronary stents, particularly polymer and bioresorbable ones, where a melted edge would compromise the device. Also used for catheter and needle machining and for drilling micro-holes in drug-delivery components. Ask vendors for sample cuts on your alloy or polymer and for residual HAZ measurements.

Medical

Ophthalmic surgery

Femtosecond lasers cut the corneal flap in LASIK and perform the incisions in cataract surgery. The SMILE procedure is done entirely with a femtosecond laser. Buyers here are typically OEMs and clinical system builders, not general micromachining shops.

Consumer electronics

Glass and display processing

Cutting and drilling cover glass, sapphire and flexible OLED panels. Non-linear absorption allows the focus to be placed inside the glass, creating a cut plane that separates cleanly without chipping. Ask about Bessel or filamentation beam delivery if your process needs it.

Automotive & aerospace

Precision drilling

Fuel-injector nozzle holes and turbine-blade cooling holes, where recast layer and microcracking from longer pulses shorten component life. Match pulse energy and rate to hole aspect ratio; ask for taper and recast data on your alloy.

Life sciences & research

Multiphoton microscopy

Two-photon and multiphoton imaging of living tissue, where fluorescence is excited only at the focal point. Spec priorities shift toward pulse quality, tuning range and low noise rather than industrial average power.

Micro-manufacturing

Two-photon polymerisation

3D printing of structures with sub-micron features by curing photoresist only where the focus sits. Ask about average power at the sample, pulse duration at the focus after the optics train, and stage/scanner sync.

How to choose

  1. 01

    Confirm the regime before you shortlist architectures

    Picosecond is often enough for industrial micromachining when sample quality clears the gate; femtosecond earns its cost for smaller HAZ, transparent-media work, or inherently fs applications. That decision is covered in the femtosecond vs picosecond satellite. Do not treat this page as a second vs-pico guide.

  2. 02

    Size duration, wavelength and power on the RFQ satellite

    The three numbers that shape most femtosecond RFQs (pulse duration at the workpiece, wavelength including harmonics, and average power as energy × rate) are walked through in the choose-specs satellite. Use that checklist once you know you need fs; this page stays on architectures, applications and shortlisting.

  3. 03

    Buy the process, not only the box

    For a production line, integration (beam delivery, scanner, motion, fixturing and process recipe) usually costs more and matters more than the laser head. Many buyers work with a system integrator or job shop first, then bring the process in-house once it is proven.

How to shortlist suppliers

  1. 01

    Lock the process requirements

    Write down material, feature size, edge-quality limit, target throughput and whether the beam must machine inside a transparent workpiece. That sheet is what vendors should respond to.

  2. 02

    Decide OEM head vs turnkey vs job shop

    If you lack scanner and motion expertise, start with a system house or contract shop. If you already integrate lasers, shortlist OEM modules with clear optical interfaces and service SLAs.

  3. 03

    Require sample processing

    Insist on cuts or drills on your real material under agreed metrics (HAZ, taper, chipping, throughput). Datasheet averages rarely survive the first fixture.

  4. 04

    Compare lifetime costs, not only list price

    Ask about pump diode lifetime, chillers, optics replacement, harmonic modules and on-site service response. Factory uptime often dominates the five-year cost.

  5. 05

    Browse suppliers on the hub

    Once the class of system is clear, use the femtosecond laser suppliers directory to see who lists fs sources or ultrafast systems, then request quotes against your process sheet.

Ready to browse companies? Open the supplier hub.

Frequently asked questions

›What is the difference between femtosecond and picosecond lasers?

A picosecond pulse lasts 10⁻¹² s, about a thousand times longer than a femtosecond pulse. Picosecond often clears industrial quality gates at lower cost; femtosecond is chosen when HAZ, transparent-media physics or an inherently fs process forces it. For the full regime decision, read the femtosecond vs picosecond satellite.

›Why can a femtosecond laser cut glass when other lasers cannot?

Glass is transparent at typical laser wavelengths and simply passes a normal beam through. The extreme peak intensity of a focused femtosecond pulse triggers multiphoton absorption, in which the material absorbs several photons simultaneously, but only in the tiny volume at the focus, where the intensity is high enough.

›What is chirped pulse amplification?

CPA stretches a short pulse in time before amplification so its peak power stays below the damage threshold of the amplifier, then recompresses it afterwards. It is what makes high-energy femtosecond lasers possible, and it won the 2018 Nobel Prize in Physics.

›What does cold ablation actually mean?

It does not mean the process is cold. It means the pulse ends before the absorbed energy can diffuse into the surrounding lattice as heat, so material is ejected without forming a melt pool. The removed material is extremely hot; the material left behind barely warms.

›Fiber or solid-state: which should I buy?

Fiber-based systems favour compactness, robustness and factory uptime. Bulk solid-state systems generally reach higher pulse energies. Hybrids (fiber seed + solid-state amp) are common. Match the architecture to energy, footprint and service model, not to marketing labels alone.

›Do I need an OEM module or a full micromachining system?

Buy an OEM module if you already integrate scanners, motion and process recipes. Buy a turnkey system (or start with a job shop) if the process is new to your plant. Integration often costs as much as the laser head.

›How much does a femtosecond laser cost?

Prices vary widely with pulse energy, average power and packaging. Compact industrial fiber-based systems generally start in the tens of thousands of dollars, while high-power industrial and research amplifiers run into the hundreds of thousands. Integration, scanners and motion frequently add as much again.

›Which specs should I put on an RFQ?

Start with material, feature geometry and sample metrics, then size pulse duration, wavelength and average power (as energy × rate) using the choose-specs satellite. Add M², power stability and OEM head vs full system once the three axes are drafted.

Sources

Figures are the commercially common cases, not physics records. Where sources disagree the page gives a range and says so.

Femtosecond Lasers: Architectures, Applications and Shortlist · Photonics Map